commit ad53694b3619c35c2a94643a733aebbc70de12dc (HEAD -> main)
Author: chenming <chenming@dcenzix.com>
Date:   Thu May 8 17:33:05 2025 +0800

    1.添加了断lvds信号12s时进入bist模式功能

commit c8dba04e449b8334369662b61841b14cde821312 (origin/main, origin/HEAD)
Author: chenming <chenming@dcenzix.com>
Date:   Thu May 8 15:14:27 2025 +0800

    通过ADC采样完成高低压处理，当电压低于8.5V或者高于16.5V时，将走下电流程关芯片使能关屏。电压恢复正常时，重新走上电流程供电开屏

commit c06702443619a43d8f92a4bf09ca16a2c7802947
Author: chenming <chenming@dcenzix.com>
Date:   Wed May 7 17:38:12 2025 +0800

    添加了温度检测功能，当屏幕温度过高时，将降低背光亮度

commit 123e704f8c7d90ccc78544b2a307a41c29e1ef04
Author: chenming <chenming@dcenzix.com>
Date:   Wed May 7 14:55:39 2025 +0800

    添加了开机自动轮询播放bist模式，5s切换一次

commit 4479768b4a7712a408f2da6829cad90235ac213f
Author: chenming <chenming@dcenzix.com>
Date:   Tue May 6 16:53:31 2025 +0800

    1.添加tp iic驱动,这样作为从机的948那一路i2c可作为主机来访问触摸数据
    2.添加tp固件版本读取函数
    3.fml_tft_write_BIST_mode不能用,否则显示数据会乱,待查
    4.OUT_TFT_SHLR开机要拉高,否则显示会左右镜像
    5.打印串口波特率从9600修改成460800,减少对程序正常运行的影响
    6.升级屏固件,屏显示正常

commit 8402eff711f515b281fed48a31cc34c38e2b58e7
Author: chenming <chenming@dcenzix.com>
Date:   Tue May 6 15:03:14 2025 +0800

    1.添加DP1208项目mcu_app部分代码